Our Sperry HP-1 cams are hard faced and ground to our "hot-street"
setup. These cams will pass smog, perform well at low and midrange
driving. These cams are hotter than Alfa's "S" cams, but do not lose
the low end driveability that occurs with the Autodelta grind.
Cam Warranty

"S" Cams (164, Milano) $700.00

10mm Lift

230 degrees duration (measured at .050")

     The Alfa "S" cams are original factory cams designed for improved
performance and still pass smog.

Sperry HP-1 Cams $725.00

10mm Lift

234 degrees duration (measured at .050")

     The Sperry HP-1 cams are designed to give higher performance than the
"S" grind and still be streetable. These cams will pass smog requirements
in most states.

Autodelta Cams $750.00

10.6mm Lift

240 degrees duration (measured at .050")

     The Autodelta grind is a hot street cam that increases power at the upper
rpm range. These cams are recommended for time trial, autocross and
and other off road competitive driving where smog is not a concern.

Sperry Full Race $750.00

11.5mm Lift

260 degrees duration (measured at .050")